The inclinometer is a geotechnical instrument that is used to measure the angle of inclination or tilt of an object with respect to gravity’s direction. We use the output to determine the variation with time in structures like retaining walls, diaphragm, and many more. In this article, we will be looking at the working, application, and features of Encardio-rite Wireless in-place Inclinometer.
Encardio-rite is one of the most renowned and leading manufacturers and suppliers of inclinometers. They have a robust collection of sensors that boasts of accuracy, reliability, and modern technology.
Let’s have a look at what Wireless IPI is.
Wireless In-place Inclinometer - Introduction
Encardio-rite Model EAN-53MW is one of the most advanced and accurate wireless in-place inclinometer systems available in the market today. It is specially curated to measure lateral movements of earthwork and other structures. The Inclinometer finds its application in places where real-time monitoring is used to present early signs of warning and gives enough time to take the required safety measures.
The Wireless IPI is a collection of inclination sensors equipped with SDI-12 digital interface, that are placed inside an inclinometer gage well. This entire instrument is connected to a wireless mesh network with Node and Gateway, making real-time monitoring a possibility. The use of wireless mesh network allows the data to transfer over long distances without any lag or delay. On the other hand, with data logging and real-time monitoring features, you can instantly provide early warning and avoid any casualties.
Wireless In-place Inclinometer - Features
It provides accurate, reliable, and high-resolution reading with long-term stability.
IPI is designed with the most sturdy and robust construction<
Get seamless connectivity in large sites with the help of the wireless mesh-based data collection protocol.
Excellent temperature stability
The IPI is very simple to install and monitor even hard to access sites and tunnels.
Wireless In-place Inclinometer - Application
Wireless IPI is helpful to accurately measure the lateral movement of structures, embankment fills, landslide areas above dams, highways, earthworks, etc.>
It used to monitor deformation of embankments, retaining walls etc.
It finds its usage in stability investigation, construction control, and ground movement monitoring that are a result of tunnel construction or any such excavation.
The In-place inclinometer is especially used to measure and provide quantitative data on the magnitude of inclination or tilt of a foundation, embankment or slope and its variations with time. The instrument helps to identify the pattern of deformation, the danger zones, as well as the effectiveness of construction control measures. The geotechnical instrument is also used post-construction to observe the behaviour of ground movement. This helps to identify any potential danger or mishap that may have an adverse effect on the stability of the structure, its foundation and appurtenant.
Wireless In-place Inclinometer - System Description
It starts with a series of inclinometer access tubes, which are attached to each other. They are then installed in a borehole or embedded in earth/rockfill or concrete structure during construction or can even be fixed to the vertical side of a finished structure. The in-place inclinometer consists of a series of inclination sensors with MEMS tilt sensors and SDI-12 digital interface. This whole system is then placed inside the inclinometer casing to cover the movement zone.
The in-place inclination sensors are equipped with a pair of pivoted sprung wheels. Whereas, the rods connecting the sensors can be customized to match individual gage length requirements. You can easily place the sensors in areas that are subjected to movements. In case only a specific portion of borehole needs monitoring, suspension stainless steel wire rope is provided to position a single or a ...[Continue Reading]
Comments